Printable Version of Topic

Click here to view this topic in its original format

Plugivery Forums _ TS - Bug Reports _ Ts2 Gui Shows For A Second On Launch Then Goes Black.

Posted by: dave_j Jan 26 2023, 07:58 PM

After not using TS2 for a while, I launched the standalone version this morning and the GUI blipped on for a fraction of a second then went completely black. I can poke around along the top of the screen and the drop-down menus will show if I click in the right spot, but the screen is completely black. Did a manual update to 2.2.3 and the problem is the same. The program is unusable in its present state.

Anyone having this same issue, or a solution?

Thanks for your help.

Posted by: pierreguillot Jan 27 2023, 09:55 AM

Hello,

Thank you for your feedback.
Can you provide further information on your operating system, audio configuration, CPU, Ram, Display, and so on?
Best regards,

Pierre

Posted by: dave_j Jan 27 2023, 01:47 PM

QUOTE (pierreguillot @ Jan 27 2023, 09:55 AM) *
Hello,

Thank you for your feedback.
Can you provide further information on your operating system, audio configuration, CPU, Ram, Display, and so on?
Best regards,

Pierre


Dell 8930
64GB Ram
Win 10, fully updated


Hello, I've attached a full system report.

Initially TS2 displayed and operated fine with no issues, but after not using it for several months it now shows as I described previously.

I have been using the standalone version primarily, and not in conjunction with my board/audio interface: Presonus Studiolive III 32S and it's accompanying standard audio driver. Though I have not used TS2 in my DAWs, I generally use Presonus Studio 1 v6.

The only things that have changed over the months since I've used TS2 are Windows Updates and Graphics Driver updates: NVIDIA GeForce GTX 1660 Ti

Thank you for any help you can provide.

 System_info.txt ( 1.47MB ) : 1
 System_info.txt ( 1.47MB ) : 0
 

Posted by: pierreguillot Jan 27 2023, 02:01 PM

My machine is rather similar (Dell i7 & NVIDIA GeForce GTX) but I run on Windows 11. The application has been tested on Windows 10 so I doubt that is the issue. Can you try to delete the preference files (TS.settings and TS.audio.settings) that are located in “C:\Users\“username”\AppData\Roaming\IrcamLab\” and then restart the application?

Posted by: dave_j Jan 27 2023, 02:08 PM

QUOTE (pierreguillot @ Jan 27 2023, 03:01 PM) *
My machine is rather similar (Dell i7 & NVIDIA GeForce GTX) but I run on Windows 11. The application has been tested on Windows 10 so I doubt that is the issue. Can you try to delete the preference files (TS.settings and TS.audio.settings) that are located in “C:\Users\“username”\AppData\Roaming\IrcamLab\” and then restart the application?



Thank you for your help, but I've just figured it out on my own. It was the graphics card driver.

At some point, probably after a Windows update, the system defaulted to using the Microsoft standard graphics driver. I took a look in Device Manager and, lo and behold,
the NVIDIA driver was showing an error. I reinstated the NVIDIA driver and now TS2 is showing correctly.

I appreciate your quick response.

Am now looking forward to digging more into TS2.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)