P&m Plug-ins Bug Reports, Please report bugs or any kind of problems using DC V.I.P. Plug-ins Options

[Notes]

Hi Nick,

I just installed a new Windows 7 system with PT10.3.9 and encountering 2 issues with the P&M plugins.

1) With the 3.0.3r1 & 3.1 plugins I can't recall my previously saved Pro Tools sessions that had P&M plugins inserted. The plugins gets made inactive to load the sessions with the following notice: The following plug-ins were made inactive because they could not be found in the plug-ins folder: followed by the list of inactive plug-ins, although they are installed corectly.

Once in the session I cannot activate them yet I can assign and open a new copy of the plug-ins from my plug-ins menu, leading to my next issue.

2) When activating a new plug-in I can't recall my previously saved presets that were saved with the default save settings as function in Pro Tools, mentioning the following error: These files are not valid settings files for the plug-in:

I would like to point out that on my earlier system I had the same issue after installing the 3.1 update, reverting back to 3.0.3r1 solved that. So during my new system install I first used the 3.0.3r1 installer as a safety measure yet for some reason that didn't work out.

I hope there is a solution and/or workaround for this as I'm working on large sessions that needs to be recalled, assigning a fresh copy of the plug-in ain't a problem yet recalling and/or importing my settings is my main concern right now.

Thanks

[Nick]

Hi Nick,

I just installed a new Windows 7 system with PT10.3.9 and encountering 2 issues with the P&M plugins.

1) With the 3.0.3r1 & 3.1 plugins I can't recall my previously saved Pro Tools sessions that had P&M plugins inserted. The plugins gets made inactive to load the sessions with the following notice: The following plug-ins were made inactive because they could not be found in the plug-ins folder: followed by the list of inactive plug-ins, although they are installed corectly.

Once in the session I cannot activate them yet I can assign and open a new copy of the plug-ins from my plug-ins menu, leading to my next issue.

2) When activating a new plug-in I can't recall my previously saved presets that were saved with the default save settings as function in Pro Tools, mentioning the following error: These files are not valid settings files for the plug-in:

I would like to point out that on my earlier system I had the same issue after installing the 3.1 update, reverting back to 3.0.3r1 solved that. So during my new system install I first used the 3.0.3r1 installer as a safety measure yet for some reason that didn't work out.

I hope there is a solution and/or workaround for this as I'm working on large sessions that needs to be recalled, assigning a fresh copy of the plug-in ain't a problem yet recalling and/or importing my settings is my main concern right now.

Thanks

Hello Notes,

We have had reports of this type of behaviour.

Could you send me a private message with your serial number as it seems to be related to a batch that are not good.

Best Regards,

Nick

[Notes]

Hello Notes,

We have had reports of this type of behaviour.

Could you send me a private message with your serial number as it seems to be related to a batch that are not good.

Best Regards,

Nick

Hi Nick, thanks for the reply, private message send.

Cheers

[Nick]

Hi Nick, thanks for the reply, private message send.

Cheers

Hello Notes,

Sorry for the delay getting back to you.

Thanks for sending the serial, I checked it and there is nothing wrong with it.

Are you still having the same problems with 10.3.9?

Take a look and see if they are RTAS or AAX that you are trying to recall.

Both 3.03r1 and the new 3.1 are AAX native and should work perfectly with 10.3.9 and PT11.

Is it possible to move up to ProTools 11 as it works only with AAX, things are a bit more tricky with the 10.3.9 which is a "hybrid" that can work as either RTAS or AAX Native that some people need to keep their compatibility with those plug-ins that are not AAX Native.

Best Regards,

Nick

[Notes]

Hello Notes,

Sorry for the delay getting back to you.

Thanks for sending the serial, I checked it and there is nothing wrong with it.

Are you still having the same problems with 10.3.9?

Take a look and see if they are RTAS or AAX that you are trying to recall.

Both 3.03r1 and the new 3.1 are AAX native and should work perfectly with 10.3.9 and PT11.

Is it possible to move up to ProTools 11 as it works only with AAX, things are a bit more tricky with the 10.3.9 which is a "hybrid" that can work as either RTAS or AAX Native that some people need to keep their compatibility with those plug-ins that are not AAX Native.

Best Regards,

Nick

Hi Nick, I still haven't found a workaround so far.

The settings I'm trying to recall are AAX as I only install AAX plugins these day's and skip the rtas versions.
The settings have TFX extensions and are saved with the default Pro Tools save as function, I have been double checking with other AAX plugins to see where and how presets gets saved and they all are .TFX

With the new P&M 3.1 I did the same, again TFX and the newly saved ones appear correctly in the presets folders. Ill keep digging into it...

Atm I can't move up to PT 11 as I'm still waiting on some plugins to become AAX.

Cheers

[Nick]

Hi Nick, I still haven't found a workaround so far.

The settings I'm trying to recall are AAX as I only install AAX plugins these day's and skip the rtas versions.
The settings have TFX extensions and are saved with the default Pro Tools save as function, I have been double checking with other AAX plugins to see where and how presets gets saved and they all are .TFX

With the new P&M 3.1 I did the same, again TFX and the newly saved ones appear correctly in the presets folders. Ill keep digging into it...

Atm I can't move up to PT 11 as I'm still waiting on some plugins to become AAX.

Cheers

Hello Notes,

One thing to check but it seems a bit bizarre to me is if the 3.1 is in "demo" mode which would prevent the presets from showing up.

Can you check the top left corner to see if the version number is listed instead of the word "demo"?

Best Regards,

Nick

[Notes]

Hello Notes,

One thing to check but it seems a bit bizarre to me is if the 3.1 is in "demo" mode which would prevent the presets from showing up.

Can you check the top left corner to see if the version number is listed instead of the word "demo"?

Best Regards,

Nick

Hi Nick,

The plug-ins are properly running in 3.1 mode, not demo. Anyway, I started recreating the settings today or rather remixing the sessions & saving new presets. After saving they show up in the preset folders as normal again. No more time to waste, clients are waiting.

Thanks for the help attempts,
Cheers

[Nick]

Hi Nick,

The plug-ins are properly running in 3.1 mode, not demo. Anyway, I started recreating the settings today or rather remixing the sessions & saving new presets. After saving they show up in the preset folders as normal again. No more time to waste, clients are waiting.

Thanks for the help attempts,
Cheers

Hello Notes,

Have you had any more time to investigate this?

Best Regards,

Nick

[kevaquarian]

Hi.

I just bought the P and M VIP bundle after using some of the plugz for the first time at a friend's studio.

I just installed them on my system. The Rotator fails the AU scan? I did it on 32 bit first, as I always do. It failed. It then failed on 64 bit too.

Is this a known issue?

Thanks,

Kev

Logic 9.1.8
Mac Pro 2010: 12 core 2.93 GHz
24GB RAM

[kevaquarian]

Hi.

I just bought the P and M VIP bundle after using some of the plugz for the first time at a friend's studio.

I just installed them on my system. The Rotator fails the AU scan? I did it on 32 bit first, as I always do. It failed. It then failed on 64 bit too.

Is this a known issue?

Thanks,

Kev

Logic 9.1.8
Mac Pro 2010: 12 core 2.93 GHz
24GB RAM

Update - the plugin passes the validation once the bundle is authorised and the plugin is re-scanned and reset in AU Manager.

[Nick]

Update - the plugin passes the validation once the bundle is authorised and the plugin is re-scanned and reset in AU Manager.

Hello kevaquarian,

I have sent this on to the developers and they have seen this problem and they are working on it.

I should have some news for you very soon.

Best Regards,

Nick

[Notes]

Hello Notes,

Have you had any more time to investigate this?

Best Regards,

Nick

Hi Nick,

yes I gave it another shot but nothing worked so I had to give and move on with my work...

Cheers

[Nick]

Hi Nick,

yes I gave it another shot but nothing worked so I had to give and move on with my work...

Cheers

Hello Notes,

Just to let you know the developers have been working on the LS Rotator and rewriting part of it.

It will be released soon as part of the next version.

So hopefully it will solve your problem.

Best Regards,

Nick

[kevaquarian]

Hi.

I have a problem with the "Chorus Ensemble". It's in mono?

I have it over a bus in Logic - I chose "mono to stereo" as I always would for a plugin of this kind. The output is mono.


Is this a known issue? I have searched this thread and found some clicking issues with this plugin from 2013 but nothing about the mono issue?

Also, the multi tap delay will not save presets? It shows a "disk error" and tells me the preset could not be saved.

Thanks,

Kev

This post has been edited by kevaquarian: Aug 21 2014, 02:54 PM

[Julien Lefebvre]

Hello, I speak not english very good, sorry.

I buy the VIP bundle yesterday. I use the plugins in reaper 32.

I have frequently bugs on the interface of the P&M plugin (missing knobs) and crash reaper.

My reaper is usually very stable, but now I have old stable plugin they have interface bugs to since yesterday !

I can't work like this. I lost many time.

Anybody have a idea of solution ?

Thanx

This post has been edited by Piler: Aug 22 2014, 02:17 AM