P&m Plug-ins Bug Reports, Please report bugs or any kind of problems using DC V.I.P. Plug-ins Options

[musec03]

Hello... Mistakenly placed this post in wrong forum spot.....

...just purchased VIP Bundle os special sale ...Killer Deal ... Started A Project Using P&M plugs exclusively ...after a project save and reopen ...each plug in was reverted to the default setting. After 15 minutes of working ...they simply stopped running ... If I deleted, reinstalled and redid all settings they would stop working again ... as if the activation process had not taken the plugins out of "demo mode".

In fact, I just saw the plug ins are running in demo mode after I submitted activation code as instructed.

Here are my specs

ASUS G55VW
OS: Windows 7
Intel® Core™ i7-3610QM CPU @ 2.30GHz
12gb RAM
NVIDIA GeForce GTX 660M

DAW: SONAR X3e build 352

Audio Interface: Focustite Scarlett 18i6 up to date driver, control panel



Thank You

[Nick]

Hello... Mistakenly placed this post in wrong forum spot.....

...just purchased VIP Bundle os special sale ...Killer Deal ... Started A Project Using P&M plugs exclusively ...after a project save and reopen ...each plug in was reverted to the default setting. After 15 minutes of working ...they simply stopped running ... If I deleted, reinstalled and redid all settings they would stop working again ... as if the activation process had not taken the plugins out of "demo mode".

In fact, I just saw the plug ins are running in demo mode after I submitted activation code as instructed.

Here are my specs

ASUS G55VW
OS: Windows 7
Intel® Core™ i7-3610QM CPU @ 2.30GHz
12gb RAM
NVIDIA GeForce GTX 660M

DAW: SONAR X3e build 352

Audio Interface: Focustite Scarlett 18i6 up to date driver, control panel



Thank You

Hello musec03,

If this is happening then the authorization failed and you are still in 'demo' mode.

Here how to solve this.

The serial number is your authorization code for the plugins.

Install the format, AU, VST or AAX that you need for your DAW, then launch the DAW, insert a Plug and Mix plug-in on any track, a dialogue box will appear where you copy and paste the serial number, click OK, you're done.

Don't copy the code by hand.

When you copy and paste make sure there are not any spaces before or after any code, as it will prevent the code from working.

The way to see if the plug-ins are installed correctly is to look in the top left corner of the plug-in.

If it shows the version number, for example version 3.1, it is installed correctly.

If it says "demo mode" than the plug-in has not been authorised correctly and the authorisation has to be done again.

Best Regards,

Nick

[SantoClemenzi]

Hi Everybody!

I purchased the VIP budle yesterday, thank you very much for that great deal!

I started working with Plug&Mix on my laptop just to figure out how to better introduce these great plugins in my workflow. After some work, at each insert, all newly added plugins GUI started to lose all (or part of) the knobs. After that, I wasn't even able to insert some plugins (like the UltraMaxIt) as they were inserted as "offline". I think it's a RAM problem because my laptop is not my production machine, it's a little bit old and not so powerfull, here you are all the specs:

- PC, Intel Core 2 duo, 4GB RAM, Win7 Home Premium 32 bit
- Reaper 4.721 32 bit
- Internal sound card with ASIO4All 2.10

Here my performance meter and other screenshot to show you my session and the GUI problems. Please let me know if it's just a RAM problem or there is something else, I saw that Plug&Mix are a little bit heavy with RAM, probably it will be better to use them on a 64 bit system with more RAM.







Thank you very much!
Santo

[SantoClemenzi]

Ok guys, nevermind, I froze all fx in some tracks to free memory, now everything's fine, GUI problems are gone, it was just my old laptop almost ready to explode

[Nick]

Ok guys, nevermind, I froze all fx in some tracks to free memory, now everything's fine, GUI problems are gone, it was just my old laptop almost ready to explode

Hello SantoClemenzi,

You know I had the same problem this week-end doing a song in ProTools on my laptop.

I just kept adding instruments and inserting effects like crazy.

Got a "low memory" warning which I ignored and bingo the dials started disappearing on my Plug and Mix.

Crashed.

Then I restarted ProTools with the "shift held down to disable all plug-ins.

Got a bit more reasonable about how many I was using and it all came back normal ;-)

Best Regards,

Nick

[kevaquarian]

Hi.

I have a problem with the "Chorus Ensemble". It's in mono?

I have it over a bus in Logic - I chose "mono to stereo" as I always would for a plugin of this kind. The output is mono.


Is this a known issue? I have searched this thread and found some clicking issues with this plugin from 2013 but nothing about the mono issue?

Also, the multi tap delay will not save presets? It shows a "disk error" and tells me the preset could not be saved.

Thanks,

Kev

Hi Nick.

Just wondering if you saw my post above?

Thanks.

Kev

[SantoClemenzi]

Quick question: are there any issues in installing both 32 bit and 64 bit versions of the VIP Bundle?

I'm asking because I have a 64 bit machine with Reaper 64 bit and Harrison Mixbus (which is unfortunately just 32 bit) installed and I'd like to use the bundle in both DAW.

Thank you very much!

[David-Paul]

Hi,

I recently buy P&M echoflex...
When i use it, if variation isn't min, i've a saturation sound...

Thank's

DP

[kevaquarian]

Hi Nick.

Just wondering if you saw my post above?

Thanks.

Kev

Hi.

Just bumping this one as there's been no reply as yet - about 2 weeks I think? Are you guys on holiday perhaps? (not sarcastic - just genuinely wondering, as the replies seem to have been pretty regular until recently).

Thanks,

Kev

[Nick]

Hi.

I have a problem with the "Chorus Ensemble". It's in mono?

I have it over a bus in Logic - I chose "mono to stereo" as I always would for a plugin of this kind. The output is mono.


Is this a known issue? I have searched this thread and found some clicking issues with this plugin from 2013 but nothing about the mono issue?

Also, the multi tap delay will not save presets? It shows a "disk error" and tells me the preset could not be saved.

Thanks,

Kev

Hello Kev,

Sorry for the delay getting back to you, we are usually a bit faster, but there were vacations and the VIP Bundle promo has kept us real busy.

About the "mono to stereo" problem in Logic,I will pass it on to our developers.

Just so I know, it is a "mono" bus the Chorus Ensemble is inserted on to?

Then you choose to make the plug-in "mono to stereo"

The Chorus Ensemble is mono or stereo depending on the channel it is inserted into.

If you create a separate stereo bus, does the Chorus come up stereo?

As a ProTools user, I usually send to a stereo bus from two sends (left and right) on the mono channel i want to send from.

But I know other DAWs let you patch in a stereo effect on a "mono" channel, useful for a Chorus.


I will also mention the fact that the Multi-tap is not saving presets to them.

Best Regards,

Nick

[Nick]

Quick question: are there any issues in installing both 32 bit and 64 bit versions of the VIP Bundle?

I'm asking because I have a 64 bit machine with Reaper 64 bit and Harrison Mixbus (which is unfortunately just 32 bit) installed and I'd like to use the bundle in both DAW.

Thank you very much!

Hello SantoClemenzi,

Yes it could be a problem as there should only be one Plug and Mix folder present.

The best way to do this is to have two different partitions, one 64 bit, one 32bit, or another external disk with an 32bit OS to boot the 32bit configuration and use the Harrison with all the plug-ins in 32 bit mode including the Plug and Mix.

Or maybe wait for the Harrison to be 64 bit?

Best Regards,

Nick

[Nick]

Hi,

I recently buy P&M echoflex...
When i use it, if variation isn't min, i've a saturation sound...

Thank's

DP

Hello DP,

The Variation knob adds a modulation like a chorus would this might be interpreted as a "saturation" but it is just a blending of the signal with a "detuned" copy of itself.

This mimics the sound of "vintage" echo units which adds "character" to the effect.

If it is not to your liking please leave it at the minimum.

Best Regards,

Nick

[kevaquarian]

Hello Kev,

Sorry for the delay getting back to you, we are usually a bit faster, but there were vacations and the VIP Bundle promo has kept us real busy.

About the "mono to stereo" problem in Logic,I will pass it on to our developers.

Just so I know, it is a "mono" bus the Chorus Ensemble is inserted on to?

Then you choose to make the plug-in "mono to stereo"

The Chorus Ensemble is mono or stereo depending on the channel it is inserted into.

If you create a separate stereo bus, does the Chorus come up stereo?

As a ProTools user, I usually send to a stereo bus from two sends (left and right) on the mono channel i want to send from.

But I know other DAWs let you patch in a stereo effect on a "mono" channel, useful for a Chorus.


I will also mention the fact that the Multi-tap is not saving presets to them.

Best Regards,

Nick

Hi Nick.

Thanks for the reply.

It matters not which kind of bus I choose. Just tested it with mono and stereo. So using the "stereo" version of the plugin on a stereo bus, and the "mono to stereo" version on a mono bus.


EDIT!

An update - If I use a stereo source - i.e. a VI with a stereo output, and couple it with CE on a stereo bus using "stereo" plugin mode, the output from CE is in stereo. A mono source with "mono to stereo" CE renders a mono output.

Please update me with progress on a fix for this?

Can another user please check this on their system to verify it's not just my setup that is producing this?

Thanks!

Kev

This post has been edited by kevaquarian: Sep 12 2014, 12:41 PM

[David-Paul]

thank's

tghis delay's really nice ;-)

[Nick]

thank's

tghis delay's really nice ;-)

Hello David-Paul,

Glad to hear that it is working well for you.

Best Regards,

Nick