P&m Plug-ins Bug Reports, Please report bugs or any kind of problems using DC V.I.P. Plug-ins Options

[Nick]

Quick question: are there any issues in installing both 32 bit and 64 bit versions of the VIP Bundle?

I'm asking because I have a 64 bit machine with Reaper 64 bit and Harrison Mixbus (which is unfortunately just 32 bit) installed and I'd like to use the bundle in both DAW.

Thank you very much!

Hello SantoClemenzi,

Yes it could be a problem as there should only be one Plug and Mix folder present.

The best way to do this is to have two different partitions, one 64 bit, one 32bit, or another external disk with an 32bit OS to boot the 32bit configuration and use the Harrison with all the plug-ins in 32 bit mode including the Plug and Mix.

Or maybe wait for the Harrison to be 64 bit?

Best Regards,

Nick

[Nick]

Hi,

I recently buy P&M echoflex...
When i use it, if variation isn't min, i've a saturation sound...

Thank's

DP

Hello DP,

The Variation knob adds a modulation like a chorus would this might be interpreted as a "saturation" but it is just a blending of the signal with a "detuned" copy of itself.

This mimics the sound of "vintage" echo units which adds "character" to the effect.

If it is not to your liking please leave it at the minimum.

Best Regards,

Nick

[kevaquarian]

Hello Kev,

Sorry for the delay getting back to you, we are usually a bit faster, but there were vacations and the VIP Bundle promo has kept us real busy.

About the "mono to stereo" problem in Logic,I will pass it on to our developers.

Just so I know, it is a "mono" bus the Chorus Ensemble is inserted on to?

Then you choose to make the plug-in "mono to stereo"

The Chorus Ensemble is mono or stereo depending on the channel it is inserted into.

If you create a separate stereo bus, does the Chorus come up stereo?

As a ProTools user, I usually send to a stereo bus from two sends (left and right) on the mono channel i want to send from.

But I know other DAWs let you patch in a stereo effect on a "mono" channel, useful for a Chorus.


I will also mention the fact that the Multi-tap is not saving presets to them.

Best Regards,

Nick

Hi Nick.

Thanks for the reply.

It matters not which kind of bus I choose. Just tested it with mono and stereo. So using the "stereo" version of the plugin on a stereo bus, and the "mono to stereo" version on a mono bus.


EDIT!

An update - If I use a stereo source - i.e. a VI with a stereo output, and couple it with CE on a stereo bus using "stereo" plugin mode, the output from CE is in stereo. A mono source with "mono to stereo" CE renders a mono output.

Please update me with progress on a fix for this?

Can another user please check this on their system to verify it's not just my setup that is producing this?

Thanks!

Kev

This post has been edited by kevaquarian: Sep 12 2014, 12:41 PM

[David-Paul]

thank's

tghis delay's really nice ;-)

[Nick]

thank's

tghis delay's really nice ;-)

Hello David-Paul,

Glad to hear that it is working well for you.

Best Regards,

Nick

[Pentacheese]

Hi, i purchase the VIP Bundle (very amaizing plugins , but greedy for RAM ) and find something:

1- PC
2- Windows 7 Home Prenium
3- FL Studio 11
4- Realtek High Definition Audio (Internal)
5- No
6- There is one knob from the plugin "PM-Multi-Tap Delay", the big one called "Speed", which reset to the default value 800ms when i relaod my project.

Have a good day!

This post has been edited by Pentacheese: Sep 24 2014, 12:47 AM

[Nick]

Hi, i purchase the VIP Bundle (very amaizing plugins , but greedy for RAM ) and find something:

1- PC
2- Windows 7 Home Prenium
3- FL Studio 11
4- Realtek High Definition Audio (Internal)
5- No
6- There is one knob from the plugin "PM-Multi-Tap Delay", the big one called "Speed", which reset to the default value 800ms when i relaod my project.

Have a good day!

Hello Pentacheese,

The PM-Multi-Tap Delay should save the settings that was part of your session. The fact you say that it go back to 800ms meaning it is 'synced to the session's tempo. Maybe the relaunch of FL Studio 11 resets the PM-Multi-Tap Delay?

More likely is the fact that the FL Studio 11 does not see the 'users setting' that should be saved with the session.

One question, does the top left corner show the version number like 3.2? If it says demo then the install failed and the VIP Bundle is still in 'demo' mode and should be installed again.

Best Regards,

Nick

[Pentacheese]

Hello Pentacheese,

One question, does the top left corner show the version number like 3.2? If it says demo then the install failed and the VIP Bundle is still in 'demo' mode and should be installed again.

Best Regards,

Nick

Hi Nick,

I get the version 3.2.0 at the top left corner.
Only one knob from the plugin wasn't saved, all others were (color, repeat, etc...).

Have a good day!

This post has been edited by Pentacheese: Sep 24 2014, 04:08 PM

[Nick]

Hi Nick,

I get the version 3.2.0 at the top left corner.
Only one knob from the plugin wasn't saved, all others were (color, repeat, etc...).

Have a good day!

Hello Pentacheese,

Which knob is not being saved?

Best Regards,

Nick

[Pentacheese]

Hello Pentacheese,

Which knob is not being saved?

Best Regards,

Nick

Hi Nick,

It's the "speed" knob, at center.

Thanks !

[PeeTee11]

I purchased the VIP bundle, and am having issues with a couple of things.

Ambiosoniq sometimes has distortion (crackling) and other times doesn't seem to pass signal. In the second scenario, sometimes it will show input signal in the input meter, but won't show output signal, sometimes neither meter is showing signal. I have to close PT11 and reboot my machine to solve it. This can happen upon opening a session, or sometimes the session will be fine and in the middle of working, I will hit play and it happens. Neither of these bugs have happened when using RTAS version in PT10.

The other issue I've had is PT11 crashing when using any amp modeling plugin to record. Everything works fine until I finish recording and disarm the track that has the plug inserted, at which time there is a loud, shrill tone and PT11 crashes. Haven't tried this in PT10.

Win7 pro 64
PT11.1.2
Digidesign 003
I7 4930k
32g RAM
ASUS Sabertooth X79
3x SSDs
ASUS GTX 760

This post has been edited by PeeTee11: Oct 2 2014, 06:21 AM

[Nick]

I purchased the VIP bundle, and am having issues with a couple of things.

Ambiosoniq sometimes has distortion (crackling) and other times doesn't seem to pass signal. In the second scenario, sometimes it will show input signal in the input meter, but won't show output signal, sometimes neither meter is showing signal. I have to close PT11 and reboot my machine to solve it. This can happen upon opening a session, or sometimes the session will be fine and in the middle of working, I will hit play and it happens. Neither of these bugs have happened when using RTAS version in PT10.

The other issue I've had is PT11 crashing when using any amp modeling plugin to record. Everything works fine until I finish recording and disarm the track that has the plug inserted, at which time there is a loud, shrill tone and PT11 crashes. Haven't tried this in PT10.

Win7 pro 64
PT11.1.2
Digidesign 003
I7 4930k
32g RAM
ASUS Sabertooth X79
3x SSDs
ASUS GTX 760

Hello PeeTee11,

Could you send me a support ticket at this link:

http://support.dontcrack.com/

Just copy and paste the message that you sent above with an email where I can reach you.

The reason for me asking for this I have PT 11 test that we can do that solved some problems that some other people had and need to do from inside the 'ticket' system.

Best Regards,

Nick

[bleeper4]

Hi,

MultiTap can't seem to recall my delay settings. It will recall all other settings (like timing and pan), just not the big knob. I am using synced mode, but regardless of which mode I'm using, it resets to 3 o'clock every time I close and re-open my DAW.

Using PC, Windows 8.1, Reaper 4.75 (64-bit), using internal audio interface, no VST wrappers.

Thanks!

[Horse Antler Ran...]

Dear friends,

If you encounter systematic bugs or any other kind of problems using our DC V.I.P. Series plug-ins, please report them here !

Please visit our Tech Support Pages before you do so.

In order to fix bugs, we need to reproduce them in the exact same environment as yours. We therefore ask that you bring as many technical details as possible concerning your computer, DAW and overall studio environment :

1- Platform (Mac or PC)
2- Exact computer OS version
3- DAW sequencer with exact version
4- Which audio interface are you using (internal sound card or external audio interface)
5- Are you using third party software such as VST rappers ?
6- Anything else that can help our team reproduce the problems you encounter.

Thanks in advance for your time helping us improve our products.

Kind Regards - peter

[SolarAxix]

I'm trying to install PlugAndMix_VIP1_win32_VST_v3.2.0.zip (SetupVST32.exe), and Norton AV is telling me that it has a low reputation score and deletes the file before I can run it (Here's the link with the reason for the file being flag: http://www.symantec.com/security_response/...-051308-1854-99)

Any confirmation that it isn't a issue and I can tell Norton AV to skip the check on that file would be much appreciated.

Thanks!

This post has been edited by SolarAxix: Jan 25 2015, 09:22 PM